Samsung LN46A530 User Manual page 68

Problem
image _snot stable anu may appear
to vibrate when you have a computer
connected ;o the PC input.
Image Is not centered on the screen.
The p_c[ure appears d_storted _nthe
corner of the screen.
Possible Solution
If the setting is not correct, use your computer utility program to change the
display settings.
Your TV supports multiscan display functions within the following
frequency domain:
Horizontal frequency (kHz) 30~60
Vertical frequency (Hz) 60~75
PC Maximum refresh rate (at 60 Hz) 1920 x 1080
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
If "Just Scan" is selected with some external devices, the picture may appear
distorted in the corner of the screen. This symptom is caused by the external
The "Resets all setungs to the default This appears when you press and hold the EXiT button for a while. The product
value s- rnessage appeals: .................. settings a[-e !esel: t°!he fac!°rY de!at)]_ts- .................
This TFT LCD panel uses a panel consisting of sub pixets (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels witl have no impact on the performance of
the product.