Trimmer Operation; Extension Cords - Remington RM3218H Owner's Manual

Dual-action electric hedge trimmer
Hide thumbs Also See for RM3218H:
Table of Contents

Advertisement

Available languages

Available languages

4
I
3
trimmer
operation
_
WARNING: Read and under-
stand this owner's manual before
operating trimmer, Make certain
you read and understa nd all Safety
Warnings on pages I and 2 of this
manual. Improper useofthistrim-
mer can result in severe injury or
death from fire, electric shock, or
body contact with moving parts.
Extension Cords
Use proper extension cord with this trim-
mer. Use only a polarized
(i.e., one blade
is wider than the other), UL listed exten-
sion cord marked
for outdoor
use. _he
cord must be marked
with
suffix W or
W-A following the cord type designation.
Example: SJTW-A or SJTW.
Use proper sized cord with this trimmer.
Cord must be heavy enough
to carry cur-
rent needed.An
undersized
cord will cause
voltage drop at trimmer._he
trimmer will
lose power and overheat.
Follow cord size
requirements
listed below:
Connecting
Extension
Cord
_lb WARNING: Fully seat the ex-
tension cord on the power cord of
tool. Failure to do so could lead to
overheating of trimmer.This could
causeafirethat resultsin personal
injury to you or others.
• he trimmer
has a built-in
extension
cord
retainer._his
cord hitch prevents accidental
disconnection
of the power cord duringuse.
_Ihe cord hitch is molded
into the lower
hand guard area of the tool housing.
1.
Plug the power cord into the exten-
sion cord (see Figure 3-1).
2.
Create
a loop in the extension
cord
and insert the loop through
the bot-
tom of the tool housing
(see Figure
;-2).
3.
Pull the loop tight around the molded
cord hitch (see Figure 3-3).
Note: An optional
method
of retaining
the extension
cord is shown
in Figure
3-4. Use this method
with larger-gauge
cords that may not fit into the extension
cord retainer.
Figure 3-2:Inserting extension cord100p throughbottom
ofhandle
Figure3-3:Pullextension cordlooptight aroundmolded
cordhitch
Keep cord away from cutting
area. Make
sure cord does not catch on branches
dur-
ing cutting.
Inspect
cord often.
Replace
damaged
cords.
Figure 3-1: Pluggingtrimmer powercordintoextension
Figure3-4:Optionalmethodof retainingextension cord
cord

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm4022hRm4522th

Table of Contents