Table of Contents
Advertisement
Timer recording
Timer recording can be programmed
on-screen
with the remote control.
The built*in timer allows automatic
unattended
recording
of up to 8
programs within 1 month.
Preparation:
• Press TVNCR to select the TVNCR
mode.
• Load a cassette tape with the erase prevention tab intact.
• Press DISPLAY/CALL
to verify that the time and date are
correct (see page 36).
Example:
Program a timer recording for the 23rd day, channel 125
(CATV), 7:00 - 9:30 PM on timer program number 1 (Tape speed: SLP).
Press TV MENU. Select "TIMER
REC SET", then press ENTER.
Press Aor
•
to select one of the
program line. then press ENTER.
NOTES:
• If the T.REC indicator blinks when the
timer recording ended, the TV program
has not been completely
recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove
the cassette tape.
• During timer recording standby mode,
the VCR operation cannot be used. To
use the VCR operation, press TIMER
REC to deactivate the timer. After you
use the VC R, press TIMER REC again
to put the VCR into timer recording
standby mode.
• If you press TIMER REC during timer
recording, the recording operation will
be interrupted.
If you press TIMER
REC again within the programmed time,
the recording operation will start again.
• After a power failure or disconnection
of the power plug, all programmed
recording settings
and time display
will be lost upon resumption of power.
In this case, reset the clock (see pages
16-18)
and reprogram
any timer
recordings.
38
3
4
5
6
Press Aor
•
to select the date, then
press ENTER.
NOTE:
To set up a daily or weekly timer, go to
page 39.
Set the start time, end time,
channel
and tape speed
as in step 3,
NOTES:
• Press CANCEL to move cursor backward
for correction.
• To record from external source set the
channel to "L1" or "L2", "L1" or "L2" will
appear next to CH 125 (or 69).
To enter other programs, repeat step
2 through 4.
• To return to the normal screen.
press TV MENU twice.
Press TIMER REC. The T.REC indicator will light and the
VCR stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the T.REC indicator does not light in spite of the pressing of
TIMER REC, the cassette may not have been loaded yet. (see
page 31)
• If the cassette is ejected in spite of the pressing of TIMER REC,
the erase prevention
tab of the cassette may have been
removed. (see page 31)
Advertisement
Table of Contents
