Table of Contents
Advertisement
One-touch Timer Recording (OTR)
The One*touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
Preparation:
• Press TVNCR to select the TV/VCR mode.
Example:
One-touch Timer Recording for 30 minutes.
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
Press SPEED to select the desired tape
speed SP or SLP.
The tape counter and SP or SLP will
appear on the screen temporarily.
Set the TV/CATV option to the appropriate position (See page
22).
Press Direct Channel Selection (0*9)
or CH +/- to select the channel to be
recorded.
5
Press REC/OTR
Press the button again to stop recording after
30 minutes. Each additional press of REC/OTR will increase
recording time as shown in the chart below, up to a maximum of
6 hours. The OTR and recording time will appear on the screen
temporarily.
Press
Recording time
Press
Recording time
once
NORMALREC 5 times
3:00
twice
0:30
7 times
4:00
3 times
1:00
8 times
5:00
4 times
1:30
g times
6:00
5 times
2:00
10 times NORMAL REC
NOTES:
• If you wish to watch the DVD playback
during the recording or the OTR, press
DVD to change to DVD mode and
perform the DVD playback.
• The channel cannot be changed
during recording.
To cancel OTR
Press STOP.
"•"
will appear on screen temporarily.
37
Advertisement
Table of Contents
