Tv Stand Installation - RCA LED22B45RQD User Manual

TV LED22B45RQD is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out
the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the panel from
being damaged.
The panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.
Always unplug the AC cord first when
installing/removing the stand.
Step Two
Take out the stand and insert the stand into the installing slot in the
lower part of the TV, then put the stand to relevant position of the
TV set until all the holes match each other completely.
Match the locating poles of the TV stand to the locating
holes of the TV set completely.
Please take note of the stand direction:
Longer side
The bottom view of the TV (Front cabinet faces down)
Step Three
Insert four M4 screws (all same in size) and tighten them.
Pedestal Screws Quantity Part #
M4 x 12mm 4pcs RS01TB412H
9