Table of Contents
Advertisement
,
.
.
Press FWD to forward
the tape until the time counter reads
0:30:00.
Press STOP. This is the approximate
end of the program.
(You
may want to press PLAY to verify.) Now, you can begin
recording
at this spot.
Press INFO to remove the time counter from the screen and
return to the normal display mode.
On-Screen
Displays
The INFO button
shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
,
2.
.
Press INFO to see the on-screen displays.
Press INFO again to have only the time counter remain on
the screen.
Press INFO again to return to the normal display.
Turning off the VCR also resets the displays.
1
2
Stop
Ch
05
0:30:00
11/18/97
Tue
01:30PM
SLP
On-screen disp_y
(times ouH
0:30:00
Time counter only
(does not time out)
3
Normal
display
47
Advertisement
Table of Contents
