Table of Contents
Advertisement
Will not Auto Channel
Search
active
channels
correctly
•
Check to make sure the antenna connections
are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA
feature is set correctly.
•
If Detect Automatically
was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either
CABLE TV or ANTENNA
instead.
•
May not need to auto channel
search if using a cable box.
Refer to the VCR Channel List or contact your cable
company
for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
Cassette
with safety
tab removed
does not start
to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator
flashes
•
Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter
disappears
during searching
•
This is normal.
On-screen
menus appear in English, French, or Spanish
•
Check Language
feature.
No stereo sound during playback
•
Check to make sure the Playback: HI-FI/MIX/LINEAR
feature is set to HI-FI to hear stereo sound during
playback.
•
Must use the AUDIO/VIDEO
jacks on the back of the VCR to hear stereo sound.
Stereo
audio
too noisy
•
Stereo signal is weak. Set Reception:
STEREO/SAP/MONO
feature to MONO.
•
Press one of the TRACK buttons
to minimize
the noise.
44
Advertisement
Table of Contents
