To Control A "L'v - GE 25GT539 User Manual

About Programming the Remote
The remote can be programmed to control other brands of
remote controllable TVs. It is already programmed to operate
most GE, RCA, and ProScan TVs.
Programming the Remote to Control a TV
If the TV does not turn on when you press the TV button, the
remote needs to be programmed.
Follow these steps to program the remote to control your
particular TV:
.
2.
.
4.
5.
.
Turn on the TV.
Find your TV brand and code number(s) on the code list on
the next page.
Press and hold the TV button on the remote.
Enter the two-digit code from the code list.
Release TV, and then press CHAN up or down. If the TV
responds to the remote commands, the remote is
programmed.
If the TV does not respond, repeat these steps using the next
code in the list.
Operate the TV
After you set up the remote, see which buttons operate your TV.
1. Point the remote at the TV, and press the TV button.
If the TV does not turn on, press the TV button and then
press the OFF button.
2. You may want to experiment to see which buttons operate
your TV. Try pressing buttons, such as VOL and MUTE. See
"TV Function Buttons" in the VCR Basic section for details.
32