Table of Contents
Advertisement
Using Your TV and Remote
With VCRs:
Setting the VCR1 Channel
The VCR 1 Channel works with VGR on the remote.
If the VCR 1 Channel
is set, pressing
VCR selects the channel to see the VCR picture.
The VCR 1
Channel
setting depends
on which diagram
you have used from the
Connection
Guide.
If you want to turn this feature off, set the VCR 1
Channel
to Disable.
Refer to the chart below for your setting.
1. Select the Setup
Menu
Controls
Alarm
Ad
13
A. Press TV to set the remote to
control
the TV.
B. Press MENUopNOG to select the
Setup menu.
This menu is
white.
2. Highlight
VCR1 Channel
Controls
Alarm
13
A. Press MOVE • (down) to
highlight the VCR 1 Channel.
B. Press I*"to highlight
the channel.
3. Enter channel
number
3ontrols
Alarm
13
A. Enter channel 00, 03, or 04.
Choose your setting from the
chart below.
Press CHANNEL
down until "Disabled"
is
displayed
to turn the feature off.
Diagram
used from the
Connection
Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
4B, 5B
Set VCR1 Channel
to:
i .............
i
00
3 or 4 (same
as 3/4
switch)
9
Advertisement
Table of Contents
