RCA F25217 User Manual page 16

RESET Returns all picture quality controls to their original settings.
MOVE (Arrows) Used to point to different items in the menu system. Also
used to adjust the menu controls.
P ROGRAMMI NG TH E REMOTE TO CONTROL
OTH E R COMPON ENTS
The universal remote can be programmed to control most brands of remote
controllable VCRs, and cable boxes. If you own an RCA, GE, or ProScan VCR,
you probably don't need to program it at all. Other manufacturers' brands
need to be programmed.
To determine whether the universal remote needs to be programmed, turn on
the component (VCR, cable box, satellite receiver, or laserdisc player), point
the remote at the component, and press the appropriate button (VCR1, VCR2,
SAT.CABLE, or AUDIO).Then press POWER or CHAN UP or DOWN to see if
the component responds to the remote commands. If not, the remote needs
to be programmed.
Follow these steps to program your universal remote to control your
component:
1. Turn on the component to be programmed.
2. Find the appropriate brand and code number(s) on the code list
shown below.
3. Press and hold the component button on the remote.
4. Enter the two-digit code from the code list.
5. Release component button then press POWER to see if the component
responds to the remote commands. If it doesn't, try pressing the
component button and POWER to see if the component responds.