Using The Remote To Select An Audio Processor - RCA P52921YX3-G User Manual

Second Audio Program (SAP) Ptays the program's audio in a
second language, if one is available. The TV displays the word
SAP when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used
to broadcast a program's audio with descriptions of the video
for the visually impaired.
Audio Output & Speakers Displays a choice list that lets you
turn the TV's internal speakers on or off and set the audio outputs
to fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV's
speakers on and allows variable output from the TV's audio
output jacks.
Variable Output, Speakers Off This setting turns the TV'S
speakers off and altows variable output from the TV's audio
output jacks.
Fixed Output, Speakers Off This setting turns the TV'S
speakers off and allows fixed output from the TV's audio
output jacks to an external device such as a surround sound
amplifier. With Fixed Output On, the TV's volume control, tone
controls and mute are disabled.
USING THE REMOTE TO SELECTAN
AUDIO PROCESSOR
You can change the audio processor from the Audio menu, as
illustrated above, or by pressing the SOUND button on the remote.
To make a selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR
to exit.
SOUND GO BACK
GUIDE INFO
o ,o
MENU CLEAR
© ©
%.N,
REVERSE PLAy FORWARD
REC,VCR÷ STOP PAUSE
pip SWAP CH CTRL RESET
31