Grid Guide - RCA P52921YX3-G User Manual

GRID GUIDE
The Grid Guide appears each time you enter the GUIDE Plus+ Gold menu
system. It displays the current programming for each channel, The live
program is displayed in the video window.
• Use the up and down arrows to browse channel listings and CN ^_
to page through listings. Use the right and left arrows to browse
future program listings,
To tune to a channel, highlight the program you want to view in the
channel listing and press OK. Press CLEAR to exit the GUIDE Plus+
Gold System and return to the original channel. Press GUIDE to exit
the GUIDE Plus+ Gold System and tune to the channel in the video
window.
GUIDE Plus+ Gold screens illustrated in
this book are representations of what
you are likely to see. Not all channels,
programs, and GUIDE Plus+ Gold
information depicted will be available in
your area.
New features and options can be
downloaded to the GUIDE Plus+ Gold
System, so these too are subject to
change.
Grid Guide
Action Buttons
Grid Guide Action Buttons
Action buttons will change according to where you are in the GUIDE
Plus+ Gold System. Be sure to look at the action bar before pressing the
number next to each action button.
When highlighting the Channel listings, the following Action buttons
are available on the bar:
Grid Guide
Selection
m R_l
Watch Press 1 on the remote to place a timer in the Schedule for
the TV to turn on and tune to the program highlighted in the
Channel listing. When the TV turns on, the GUIDE Plus+ Gold System
will automatically appear with the scheduled program highlighted
and tuned in the video window.
Go To Press 2 on the remote to bring up the direct dial box and
enter the number of the channel you want. This will highlight the
channel and current program in the channel listing of the Grid
Guide. Press OK to tune to the highlighted channel. If the video
window is unlocked, you can press GUIDE to tune to the channel.
Record Press 3 on the remote to place a timer in the Schedule for
th e VCR to record the program highlighted in the Channel listing. If
you have a cable box, changing channels on the TV will not cause
the cable box channel to change while recording.
The program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+ Gold
System will not schedule a conflicting timer, therefore you must choose
between the two programs.
When highlighting the Channel names (the left column on the Channel
listing), the following Action buttons are available on the bar:
Action Button
command
numbers
vcnl o_orF TV
_D VGR2 AJX_T*CAB'E
MLITE SKIP
Timer Recording
Make sure that the G-LINK cable is
connected to the TV, the wands are
positioned correctly in front of the VCR,
and all steps in the GUIDE Plus+ setup
routine have been completed successfully.
M
46