Table of Contents
Advertisement
Picture Menu
The Picture
Menu
contains
menus
to configure
video
settings:
l)ictur( "!)r('set IPlod(,,
l)ictur( " &'ttings,
Screen Format,
Agvanced
Pictur(',
and Scr('en A_just
menu.
Each one is
described
below.
Note:
When
changing
an it('m in the Picture
l_('ng,
t/a¢ g*vvphics become
t*vvns?ar('nt
so jou can see how your a_'ustments
_{ff_'ctthe gk'tur('.
To access tl'le Picture
IPi(,nu:
1.
2.
Press MENU
on the remote control (the Main M('nu appears).
Highlight
I)ictu*r and press OK (the I)ictuTr options appear).
Note: VVI, en making ])ictur_" changes, inputs ar_"all adjust(.d indcyend('nt qf each
other: Digital cable and antenna channek a_r a_justed indcyendent
oflanalog cable
and ant('nna channek.
Picture Preset Mode
Picture Presets displays a choice list that lets you select one of these preset picture settings:
½"brant (Day), Natura/,
CTnematic (Night), 3ports, and IX,rsona/.
Choose your setting based on the degree of lighting in your room. After you select a preset,
the settings listed to the right are adjusted automaticall>
If you choose Personal, you can customize
each picture quality setting to your desired level,
and a message appears asking if you want to save those settings. After you've saved your
personal settings, you can go back into the menu and select a different
picture preset. For
example, if you normally use Personal but want to watch a show in ½"brant (Day lighting,
choose ½"b*vlnt(D<)I), watch the show, and then afterwards return to your customized
settings by choosing I)ersonak The PRESETS
button
(on Remote R602A1 Only) works
with Picture Presets. Go to the Remote chapter for more information.
Tocreatea temporary personalsetting makeyour
changesand when the message appearsasking if
you want to savethe setting, selectNo. Thepresetis
saveduntil you changethe channelor input.
Picture Settings
The l)ictur_ "S_'ttings menu displays slider controls for adjusting
the way the picture looks.
Your options
trader the Picture &'ttin_s menu are:
Contrast
Difference
between the light and dark areas of the picture.
Color
The richness of tl'le color.
Tint
The balance between the red and green levels.
Brightness
The brightness of the picture.
Sharpness
The crispness of the edges in the picture.
To create picture settings for the video inputs:
1.
Press the INPUT
button
while in the I)ictur( ".%ttings menu until the correct Video
Input Channel
appears in tl'le upper right corner.
2.
Press the right and left arrow buttons
on the remote control to select the slider.
3.
Press the up and down arrow buttons
to operate the slider.
50
Advertisement
Table of Contents
