Table of Contents
Advertisement
Connect
Supplied
Antenna,
Antenna,
or Cable
System
Without
a Cable
Box
A.
Supplied
Antenna
Follow these steps to connect the supplied antenna
to your TV/VCR. Do not connect this antenna if
you plan to connect a different type of indoor or
outdoor antenna or cable system.
1.
Insert the antenna
base into the slot on the back
of your TV/VCR.
2.
Connect
the twin-lead
ends
of the antenna
to
the screw
terminals
of the supplied
antenna
adapter.
3.
Connect
the antenna
adapter
to the VHF/UHF
connector
on the back
of the TV/VCR.
4.
Plug in the TV/VCR's
AC or DC power cord.
5.
Turn to page 3 for "Setting
up the TV/VCR.
"'
Adjust
the length
and position
of the antenna
rods
for the best reception.
•
For viewing VHF channels, extend the rods
fully.
•
For UHF viewing, shorten
the rods.
Supplied Antenna
Antenna Slot
Antenna _i
_
Adapter
'Q
WF_UH_
Back of TV/VCR
Ends
B=
Antenna
or Cable
System
Without
a
Cable
Box
1. Connect as shown.
This connection may require additional
accessories not provided.
2. Plug in TV/VCR's AC or DC power cord.
3.
Turn to page 3 for "Setting Up the TV/VCR."
D
OR
Antenna
Adapter
OR
Back of TV/VCR
30
Advertisement
Table of Contents
