RCA P46721 User Manual page 5

4.
Connect antennaor cable-TV system.
Most antenna or cable-TV systems can be connected as
show here.
Incoming Cable from Antenna or
Cablo-TV System
Back
of TV
_A
_J
• Details for connecting a home antenna to your "IV are on
page 30."
• Details for Connecting a cable-TV system to your TV
are on pages 31-32.
• l')etails for connecting a VCR to your TV are on
1: a ges 35-36.
5. Attach power cord.
FLrst attach the flat end of the power cord completely _nto the
connector on the back of your TV, and then plug the other
end into a wall outlet.
6. "I_arnon TV, adjust the volume, and select a
channel.
• Press the TV button on the remote _ turn on the TV.
When using the remote, remember to point it at the front
of the TV.
• Press'the VOL up or down button to adjust the volume to a
desired level. '
• Press the CHAN up or down button to select the next
channel in memory. You can also press two number
buttons to select a channel. To select a 3-digit cable
channel (up to channel 128), press and hold number button
1 until 1-- appears on the screen. Then press the other two
numbers. Channels 2-13 were programmed into the
channel memory for you at the factory, so pressing CHAN
up or down stops at these channels only. When you start
theAutoProgramming feature (described in"step 8), your
set will automatically scan through all channels and place
only the active channels for YOur area into its channel
memory.
,. Details about using the remote are on page 8-11.
CHAN
Button
VOL
Button
Number
Buttons
TV
VOL (Volume)
Down Button
CHAN (Channel) Down
Button