Table of Contents
Advertisement
STEP 4: PLUG IN THE TV
Plug the end into the wall outlet,
matching
the wide blade of the plug
with the wide slot in the outlet.
Be sure to insert the plug completely.
STEP 5: PLACE BATTERIES
IN THE
REMOTE
Remove the battery
compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
Replace the cover.
STEP 6: TURN
ON THE TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button
not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN
PROGRAM
GUIDE
The TV is designed
to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button
on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold system). For more
information
on setting
up the GUIDE Plus+ Gold system, see the next
section, Interactive Setup.
To get out of the GUIDE Plus+ Gold System:
Press OK to exit the GUIDE Plus+ Gold system and tune to the
highlighted
channel.
Press GUIDE to exit the GUIDE Plus+ Gold system and tune to the
channel displayed in the View window.
Press CLEAR to exit the GUIDE Plus+ Gold system and go to the last
channel you were watching.
STEP 7: PROGRAM
THE TV
Proceed to the next section, Interactive
Setup. The interactive
setup
routine
walks you through
the steps needed to fully configure
the TV.
10
Advertisement
Table of Contents
