Remote Control Buttons - RCA VR627HF User Manual

REMOTE CONTROL BUTTONS
(In alphabetical order)
AUDIO SEL toggles the VCR's audio output between Stereo,
Mono L, and Mono R.
CHANNEL Up or Down Selects next higher or lower channel
in the VCR's channel memory. Also used to scroll up and down
through on-screen display choices.
CLI_CNTR Toggles between the clock and tape counter displays
both on-screen and on the VCR's front panel.
EJECT Ejects a tape inserted in the VCR.
ENTER Selects a highlighted on-screen display.
FWD Fast forwards the tape when the VCR is stopped. Searches
forward through a tape during playback ("Cue"). Pressing this
button twice toggles between Cue mode and fast-forward mode.
INFO Shows/hides the status displays on the TV screen.
INPUT SELECT Toggles between the line input and the VCR's
tuner. Line input refers to the signal coming from the component
connected to the AUDIO/VIDEO IN jacks on the front of the VCR,
MENU Brings up VCR's main MENU on the TV screen. Also exits
out of menu screens to the previous menu.
Numbers (0 through 9, 100) Select a channel up to 99 by
pressing the 0-9 buttons. Select a cable channel over 99 by
pressing the 100 button. When 1- - appears on the screen, press
the other two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR on or off.
REC, OTR Pressing both buttons starts VCR recording. When
both buttons are pressed again, the VCR is set to record for a
specific duration of time before automatically shutting off.
Record times are built in half hour intervals from two to six hours.
RESET Resets time counter to 0:00:00. Allows you to change
entries when setting a timer recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward ("Cues") through a tape during playback. Starts slow
motion during play-pause and decreases slow-motion speed.
POWER TIMER
I/
INPUT
SELECT
TV'VCR
CLK.CNTR
INFO [ RESET
AUDIO SEL
/
MEN!
,_ ENTER
16