Not receiving all cable channels
•
Make sure you have set up the GUIDE Plus+ menu to recognize your cable
box. Select GUIDE Plus+ Menu from the Main menu, then select Setup from
the GUIDE Plus+ menu. Choose "Yes" when asked if you have a cable box.
Then select Setup from the Main menu and make sure to search for all
channels when prompted.
Can't select certain channel
•
Channel may be blocked or not approved
in the Parental Controls menu.
Noisy stereo
reception
•
Maybe you are tuned to a weak station. Change to mono sound mode
instead of stereo sound by going into the Audio menu and choosing Audio
Processor.
No picture, no sound, but TV is on
•
Maybe the cable/air setting
is set to the wrong
position. To fix, select GUIDE
Plus+ Menu from the Main menu, select the Setup option,
and provide the
correct information
on the following
screens.
•
Maybe a vacant channel is tuned.
•
If you are watching
the VCR (connected
only through
antenna
input),
make
sure the TV is tuned to channel 3 or 4_-same as the CH3/4 switch on the
VCR.
Sound okay, picture poor
•
Check antenna connections.
•
Try adjusting
sharpness function
to improve
weak signals.
Black box appears
on the screen
•
Captioning
may have turned
on. Check the Closed-Caption
Display control
panel in the Channel menu.
54