Using Your Tv And Remote; With Remote Buttons - RCA F25653 User Manual

Using Your TV and Remote
With Remote Buttons
,po_ER VCR1 SATeCABLE 1"1/
REW PLAY FF
REC STOP PAUSE
DISPLAY SKIP
O O
MU_TE C'HA'_ PREVCH
1 0 2 0 3 0
4 0 5 0 6 0
INPUTo O0 " ANTENNAo
POWER
Turns off the TV.
Turns off.compatible VCRs.
Turns on a component after a
component button is pressed.
AUDIO, VCR, VCR2.LD,
SAT.CABLE, TV
Sets the remote to control the
component. VCR2.LD can only be
programmed for one component:
either a VCR or a Laserdisc Player.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8-15.
TV
Turns on the TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8-15.
REW (Rewind)
Rewinds a tape or laserdisc.
Searches backward while tape or
laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast'forwards a tape or laserdisc.
Searches forward while tape or
laserdisc is playing.
REC (Record)
Starts recording onto tape.
STOP
Stops tape or iaserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP (Commercial Skip)
Allow3 you to scan other chan-
nels &_ing commercials.
Each F,ress adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR to cancel SKIP.
CHAN ^ and v
(Channel up and down)
Scans up and down through
channels in the TV's memory.
Moves. through channels
in VCR's memory.
VOL -t- and-
(Volume up and down)
Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between
two ch.annels.
Select a channel and then select
another. Press PREV CH to
switch between the two channels.
6