Using Your Tv And Remote; With Remote Buttons - RCA 20601 Owner's Manual

Using Your TV and Remote
With Remote Buttons
1.
Power Buttons
OFF
Turns off the TV.
Turns off compatible VCRs.
ON/OFF
Turns on a component after a
component button ispressed.
Turns off componentsexceptaudio
equipment.
1-V
Turns on thE: TV.
Shows the displays on the screen.
Sets the remote to control the TV.
See Using ttu' Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8-15.
2. TVBu_ons
CLEAR
Clears menus and displays from
the screen.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
SKIP:30 (Commercial Skip)
Allows you to scanother channels
during commercials.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press CLEAR
to cancel SKIP.
VOL + and --
(Volume up and down)
Raises and lowers sound.
Moves left and right on a menu
line. See Menu Basics on page 5.
Changes a feature setting.
MUTE
Switches the TV sound on or off.
CHAN ^ and v
(Channel up and down)
Scans up and down through
channels in the TV's memory.
Moves up and down menus. See
Menu Basics on page 5.
Moves through channels
in VCR's memory.
PREV CH (Previous Channel)
Changesback and forth between
two channels.
Select a chaI_ael and then select
another. Press PREV CH to switch
between the two channels.
MENU
Shows menus on the screen and
moves from menu to menu.
RESET
Returns the picture adjustments to
the original settings.
DONE
Saves the setup of a feature and
removes the menu from the screen.
3. Number Buttons (0-9)
Selects any channel number.
Two numbers must be pressed for
each channel. Press 0 and 6 for
channel 6.
For three digit channels, press and
hold I until 1-- appears on the
screen. Then press the other two
numbers.