Your digital clock timer operates on a 12-hour cycle. The AM indicator on the left of
the display wilt light up to let you know if the display is reading AM time.
Press the HOUR button to get the correct AM or PM hour.
Press the MIN button to get to the exact minute time.
a8 • m
• tO4 • tm
Wake (alm'm on)
Press and hold WAKE button.
While holding the WAKE button, use the HOUR and MIN buttons to change the
display to desired AM or PM wake-up time.
Release WAKE button and the current time is displayed again. Wake time is set.
Select an AM or FM station
Set wake time (See SET THE WAKE TIME directions).
Set FUNCTION SELECTOR to MUSIC position. (The WAKE INDICATOR in the
display will light.)
The radio will turn on at the wake time you set and will turn itself off after approxi-
mately 2 hours. To turn the radio off sooner, set FUNCTION SELECTOR to OFF.
Set the wake time.
Place the FUNCTION SELECTOR in the ALARM position. The WAKE
INDICATOR in the display will light.
The tone alarm will sound at the wake time you set and turn itself off after approxi-
mately 2 hours. To turn the alarm off sooner, set FUNCTION SELECTOR to OFF.
Your clock radio has a 24-hour timer. When FUNCTION SELECTOR is left in MUSIC