Table of Contents
Advertisement
Bass
Press ENTER button to select it and then use _ / _- to increase or decrease the level of the lower-pitched sounds.
Treble
Press ENTER button to select it and then use ,4 / _ to increase or decrease the level of the higher-pitched sounds.
Balance
Press ENTER button to select it and then use _ / _. to adjust the audio output between left and right speakers.
Digital
Audio Output
Press ENTER
button to select the one of mode of the digital audio output such as PCM and RCW.
Auto Volume Adjust
Press ENTER
button to adjust the volume
automatically.(TV
and HDMI input only)
Press MENU on the front panel or on the remote control and then use A / v to select the SETUP menu.
1.
Use _. / _. to move cursor to right area then use
A / v
to select what you want to adjust in the SETUP MENU.
2.
Press ENTER
button to directly
adjust it or
use .4. / _ to enter submenu
to adjust
3.
When you are satisfied with your adjustment,
press MENU to exit the main menu.
Tuning Band
Press ENTER button to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.
DTV-Signal
In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc.
Auto Ch Search
Press
,L / •
to move the cursor to the item to be selected
(item selected
highlighted
in yellow). Press ENTER key to enter
your selection
and scan. After the scan is finished,
the following
menu will display. The channels
found the automatically
]9
Advertisement
Table of Contents
