Copying And Editing; Tapes - RCA T25003BC User Manual

Copying and Editing Tapes
Operating Instructions
(Refer to hookup on page 27.)
Caution: The unauthorized
recording of television
programs and other
materials may infringe the
rights of others.
Use another VCR or camcorder as the playback VCR
and the TV / VCR as the recording VCR.
1. Turn on the VCR or camcorder and the TV/VCR.
2. Press 00 on TV/VCR's remote to select the line
input. AV appears on the screen.
8. Insert the tape you want to copy into the playback
VCR or camcorder. Insert a blank tape with safety
tab in place into the TV/VCR.
4°
Start the playback VCR or camcorder playing. If
the tape was not recorded on the playback VCR,
streaks may appear and you may need to adjust
tracking. When you reach the place you want to
begin recording, place the playback VCR or
camcorder in play pause.
5. Press REG, then PAUSE. on the TV/VCR's remote.
6.
7.
8.
Press PAUSE on both the VCR or camcorder and
the TV/VCR's remote at the same time to begin
copying the tape.
Edit out segments that you do not want to copy by
pressing PAUSE on the TV/VCR's remote to stop
copying the tape. Then, locate the next segment
you want to copy on the playback VCR or
camcorder and place it in play pause. Press PAUSE
at the same time on both the VCR or camcorder
and the TV/VCR's remote to resume copying.
Press STOP ( - ) on both the VCR or camcorder and
TV/VCR when you are finished.
Remember to press CH up or down to select a
channel on the TV/VCR for normal TV viewing.
REC
SP
0:00:00
AV
CABLE STD
7:45AM NOV. 11
22