Table of Contents
Advertisement
Using
the
TV's
Features
Grid guide
Grid guide
menu
action buttons
selection
K
Tip
Press the PIPbutton to lockor unlockthe video
window when the GUIDEPlus+systemison
the screen.
Grid Guide
Action
Buttons
Action buttons will change according to where you are in the GUIDE Plus+
system. Be sure to look at the action bar before pressing the
command numbers.
When highlighting the program, the following Action buttons appear:
Watch
Press 1 on the remote
to place a timer in the Schedule
for the TV to
turn on and tune to the program
highlighted
in the channel
listing. When
the TV turns on, the GUIDE Plus+ system will automatically
appear
with the
scheduled
program
highlighted
and tuned
in the video window.
Go To Press 2 on the remote
to bring up the direct dial box and enter the
number
of the channel
you want. Press OK to highlight
the channel
and
current program
in the channel
listing of the Grid guide. Press OK again to
tune to the highlighted
channel.
If the video window
is unlocked,
it will
automatically
tune to the channel.
•
Record
Press 3 on the remote to place a timer in the Schedule for the VCR
to record the program highlighted in the channel listing.
If you have a cable box, changing channels on the TV will not cause the
cable box channel to change while recording.
Record will only appear if you have set up the GUIDE Plus+ system and
specified your VCR type.
The program information window will display a confirmation when you have
successfully scheduled a program to watch or record.
Note:
lf you have selected two programs
to watch or record which begin
at the same time or overlap, you will receive a timer conflict message.
You must choose between
the two programs.
When highlighting the Channel names (the left column on the channel listing),
the following Action buttons appear:
•
Lock/Unlock
Press 1 to lock or unlock the video window
to either stay at
one channel
as you browse
the GUIDE Plus+ system (lock) or change
as
you browse
through
different
channels
(unlock).
Go To
Press 2 on the remote to bring up the direct dial box and enter the
number
of the channel
you want. Press OK to highlight
the channel
and
current
program
in the channel
listing of the Grid Guide.
If the video
window
is locked,
press
OK to tune to the highlighted
channel.
If the video
window
is unlocked,
it will automatically
tune to that channel.
30
Chapter
3
Advertisement
Table of Contents
Troubleshooting
