Table of Contents
Advertisement
Connections
Setup
Step 1: Identifying
Your TV's Location
1. If your country is highlighted, press OK on the remote control.
If your country isn't highlighted, press the up or down arrow button on the
remote control to highlight your country and press OK.
2.
Use the number
buttons
on your remote
to enter your zip code.
Press OK when you're
finished.
Note:
lf yourpostal
code contains
letters, press the up and down
arrow
buttons
on your remote to enter letters, andpress
the right arrow
button
to go to the next spave. The lefi arrow button
moves you to the left.
Step 2: Configuring
for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your TV is connected to cable.
1.
If your TV is connected to cable, highlight Yes and press OK.
If your TV isn't connected to cable, highlight No and press OK (STEP3:
Configuring for a VCR appears).
2.
If you have a cable box connected
to this TV, highlight
Yes and press OK on
your remote
control.
Note:
The next series of screens
is very important
because the GUIDE
Plus+ system must find
the correct cable box information
in order to
receive the correct TV program
listings.
If you don't have a cable box connected to this TV, highlight No and
press OK (STEP 3: Configuring for a VCR appears).
rip
If you're
not sure which channel
is the
cable box's output
channel,
consult
the book
that came with your cable
box or contact
your cable company.
16
Chapter
1
Advertisement
Table of Contents
Troubleshooting
