Advertisement
Ste_p_33
_ecure your RCA multimedia
monitor
to the top of
the stand
(This stand is specifically
designed for RCA
multimedia
monitor model CM36702ET
and
Compaq computer model 259600-001.)
(Safety
Note
: Two people
are required
for proper
placement
of the RCA
multimedia
monitor
on the
stand.)
• Position
your monitor
on the top of the stand so that the curve
of the bottom control panel fits into the curve in the top of the
stand.
• Remove the screw near the bottom of the monitor back cover
as shown in the drawing to the right. Replace this back cover
screw (S) with the cabinet screw (M) provided and attach the
TV bracket (J) to the monitor cabinet backcover.
• Using the truss head screw (L) and the wing nut (K), attach
the TV bracket
(J) to the top of the stand through
the bracket
hole and then to the pre-drilled
hole (R). Do not overtighten
the screws.
TV/PC monitor
back cover
O
Advertisement
