Download Print this page

Poulan Pro PP2000T Instruction Manual page 5

Cultivator/trimmer attachment
Hide thumbs Also See for PP2000T:

Advertisement

Available languages

Available languages

1.Loosen
the coupler by turning the knob
counterclockwise.
Upper Shaft
Coupler
Lower
\
LOOSEN
Attachment
TIGHTEN
Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
Lower Attachment
3. While
securely
holding
the upper
shaft,
pull the attachment
straight
out of the cou-
pler.
INSTALLING
ATTACHMENT
1. Remove the shaft cap from the attachment
(if present)
and discard.
2. Position
locking/release
button of attach-
ment into guide recess of upper shaft cou-
pler.
3. Push the attachment
into the coupler
until
the locking/release
button snaps
into the
primary hole.
4. Before using the unit. tighten the knob se-
curely by turning clockwise.
Coupler
Primary
Hole
Guide Recess
Upper
Locking/
Attachment
Shaft
Release
Button
='_WARNING:
Make sure the locking/
release
button
is locked
in the primary
hole
and the knob is securely
tightened
before op-
erating
the unit. Using the wrong
hole could
lead to serious injury or damage to the unit.
Secondary
Hoie
INSTALLING
ATTACHMENT
HANGER
An attachment
hanger is provided for storage
when attachment
is not in use.
To install hanger on attachment:
1. Removethe
shaft cap from the attachment
(if present) and discard.
2. Press and hold the IocMng/re_ease
button.
3. Push hanger onto the attachment
until the
Iocking/release
button snaps into the hole.
OPERATING
POSITION
ALWAYS
WEAR:
Eye Protection
Long Pants
Heavy
Shoes
A
WARNING:
To
avoid
personalinjury,
never carry the cultivator while the unit is run-
ning.
_WARNING:
The gearbox
gets very
hot after extended
periods
of use.
To avoid
burns, do not touch the gearbox
until it has
been allowed
to cool.
CULTIVATING
1. Move the cultivator to the work area prior to
starting the engine/motor.
2. With the
engine/motor
running
and the
tines off the ground, press the throttle trig-
ger to increase
the engine speed.
3. Hold trigger handle and assist handle firm-
ly. SlowIy lower the cultivator
until the tines
make contact
with the ground.
Locking/Release
Button in Primary
Hole
4. As unit begins cultivating,
pull back on the
unit so that the tines
can penetrate
the
ground.
5

Advertisement

loading