Buttons On Top Or On The Right Side Of Thetv - Philips 42PF9996 Owner's Manual

/
AV+ Keep this button pressed and then press repeatedly to select AVl, AV2,
I-IDMI (AV3), SIDE or TV channels when in T_/ mode, according to
where you connected the accessory devices (p. 19).
- To type the dot (.) for digital channels.
.... uoo c, ooe,, who.e <So on0Au0,o
available, you can toggle between Main and sap. If not available only Main
..... I] can beselected.
ACTIVE CONTROL See p. 13.
CLOCK Time display
Ambilight see also p. 14.
::• ONIOFF Press to switch Ambilight on or off.
::• MODE Press repeatedly to select one of the predefined ambient light
settings.
Note: When the TV is in standby mode, and you tum on Ambilight, Ambilight
will be active, Only then less modes are available,
_ _ _ Should your remote be lost or broken you can still
Picture Sound Ambilight Features
Settings
Demo
Install
Exit
change some of the basic settings with the buttons on
top or on the right side (according to the type of your
set) of your TV.
Press:
• the - /1 + button to adjust the volume;
• the - PICH + button to
select
the TV channels or
sources,
Press the MENU button to summon the main menu
without the remote control,
Use:
• the -/1 + button and the - PICH + button to select
menu items in the directions as shown;
• the MENU button to confirm your selection.
Note:
_4hen activated via the MENU button on top or the right side
of the T_, only Exit lets you remove the menu,
Nawgate to ExV_ and press the MENU button.