Settings Menu; General - Philips 42PF9996 Owner's Manual

TV
Settings
Demo
Install
urce
The General menu allows you to change settings that will
typically be accessed only occasionally.
The Clock menu allows you to use your TV as a clock.
For the correct working of On timer and lock after features,
select the correct option.
The Source menu allows you to select a source.
General
This menu allows you to change various settings that are presumably adjusted less frequently than most
other settings.
General
Settings O-_
Menu background
Surf
PIP format €
Reset AV settings (
Caption Service (
OSD €
Set/Change pin €
Subwoofer €
(Intelligent lights)
Menu background
O Select Menu Background with the cursor down and press the
cursor right.
t_ Select On or Off to turn the menu background on or off.
Surf
O Select Surf.
t_ With the cursor left/right, select
• 2 channels if you want the SURF button to toggle between the
current and the previously selected channel,
• 9 channels if you want the SURF button to summon a list of
up to 9 channels which can be selected.
To add/remove a channel or source to the 9 channel list:
Tune to the channel or source you wish to add or remove.
Press the SURF button and press the cursor right to add or
remove.
Note: If there are already 9 channels/sources in the list, the one at
the bottom of the list will be removed
PIP format
0
0
0
This menu allows you to select the preferred format which can
then be displayed toggling the PIP button on and off.
Select PIP format with the cursor down.
Press the cursor right.
Select Dual screen, PIP, PIP 3 or PIP 6 with the cursor
up/down.
When Dual screen mode is activated with the remote control
PIP button, and when
• Dual screen is selected, theTV splits the screen into two
equally sized screens.
• PIP is selected, the TV shows a full screen of video with a pip
window of video on top if it;
• PIP3 or PIP6 is selected, theTV will display the main screen
together with 3 or 6 pip screens.
Reset AV settings
This function allows you to reset most of the picture and sound
settings to their predefined factory states.
O Select Reset AV settings with the cursor down.
t_ Press OK to erase settings and reset them to their default
va]ues,