Labeling The Channels - RCA P61939 User Manual

LABELING THE CHANNELS
This last step in the Interactive Setup lets you edit your channel list and
label your channels. (For more information see List and Labels in the
Features and Menus section.)
Use the CH ^ (channel up) or CH v
(channel down) buttons to change
channels in the Channel # field. This
works even if you're not in the Channel #
field. Or, enter the channel number
directly using the number buttons on the
universal remote. To enter a number
greater than 99, press and hold "1" to
enter the hundreds digit, then press the
two remaining numbers.
The List and Labels feature can also be
accessed from the Channel menu. Because
this procedure can be time consuming,
feel free to skip this step and come back
to it later.
1. Press MENU or OK to bring up the List and Labels control panel.
2.
3.
4.
Use the left and right arrows to point to the three different areas of
the control panel (called "fields").
Use the up and down arrows to scroll through the numbers in the
Channel//field, and letters in the Channel Label field, and select Yes
or No in the Normal L/stfield, You may wish to refer to the call
letters listed in your newspaper's TV section for ideas on labeling the
channels.
Repeat this process for each of your channels, Then press MENU or
OK to continue, The TV can store up to 27 labels in memory.
20