Philips HTS3371D User Manual page 39

[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press OK,
2_)Select a speaker in the menu, then press
41_ to set the delay time.
3) Press OK to confirm and exit.
[Audio Sync]
Sets the default delay time for audio output
when you play a video disc,
1) To start, press OK,
2_) Select a speaker delay in the menu, then
press 41_ to set the delay time.
3) Press OK to confirm and exit.
• Allow 1ms setting for every I foot distance between
the speaker and the listening position,
[HDMI Audio]
Selects the HDPII audio setting when you
connect this Home Theater System and the
TV with a HDHI cable.
- [On] Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
- [Off] Disables audio output from the
TV. The sound is only output through the
speaker system.
[CD Upsampling]
Converts the music CD to a higher sampling
rate using sophisticated digital signal
processing for better sound quality.
- [Off] Disables CD-upsampling.
- [88.2kHz (X2)] Converts the sampling
rate of the CDs twice as high as the
original rate.
• CD upsampling is only available in stereo mode,
4O EN