Mitsubishi Mr.Slim MSZ-FE18NA Operating Instructions Manual page 8

®OPERATING INSTRUCTIONS ®
I
ECONO COOL
Press _ during COOL mode _ to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 4°F (2°C) higher
automatically.
ECONO COOL
Press _ again to cancel ECONO COOL operation.
• ECONO COOL operation also is cancelled when the VANE or POW-
ERFUL button is pressed.
What is _EECONO COOL"?
Swing air flow (change of air flow) makes you feel cooler than constant air flow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
POWERFUL
Press _ during COOL or HEAT mode _ to
start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
POWERFUL
Press _ again to cancel POWERFUL operation.
• POWERFUL operation also is cancelled automatically in t5 minutes,
or when the ON/OFF, FAN, or ECONO COOL button is pressed.
@START @STOP
............. P ress _ or _ during operation to set the timer.
@START
(ON timer) " The unit will turn ON at the set
time.
@STOP
(OFF timer) " The unit will turn OFF at the set
time.
* @÷1 or @÷O blinks.
* Make sure that the current time is set correctly.
_ Press _ (Increase) and (_ (Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
- Set the timer while ¢÷1 or ¢÷O is blinking.
@START @STOP
Press (_ or _ again to cancel timer.
Note:
• ON and OFF timers can be set together. _4"mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see _ "Auto restart
function".
En-7