Connecting An Audio Receiver - Mitsubishi WS-A48 Owner's Manual

Connecting an Audio Receiver
Stereo Audio System
(Figure 1)
[] Connect the audio cables from AUDIO
MONITOR OUTPUT on the TV back panel
to TV IN or AUX IN terminals on the back of
the audio system. The red cable connects
to the R (right) channel, and the white cable
connects to the L (left) channel.
[] Turn off the TV's speakers through the A/V
SETTINGS Menu, page 48.
[] Set the audio system's input to the TV
or AUX position to hear the TV's audio
through your stereo system.
Figure 1. Connecting the Stereo Audio System.
A/V Receiver
(Figure 2)
[] Connect either a video cable or an
S-Video cable (but not both) from VIDEO
MONITOR OUT on the back of the A/V
receiver to VIDEO INPUT-1 or INPUT-2 on
the TV back panel.
[] Connect a video cable from VIDEO
MONITOR OUTPUT on the TV back panel
to VIDEO TV IN on the back of the A/V
receiver.
[] Connect a set of audio cables from AUDIO
MONITOR OUTPUT on the TV back panel
to AUDIO TV IN on the back of the A/V
receiver. The red cable connects to the
R (right) channel, and the white cable
connects to the L (left) channel.
®l®®
@ @@
@ @@
®®
Figure 2. Connecting the A/V Receiver.