Connections - Mintek MDP-1760 Manual

USING AC ADAPTOR -_ @
The unit can use special applied AC adaptor.
l.Insert the AC adaptor into DC IN jack of the unit.
2.Insert one end of the power supply cord into the input jack of the adaptor and the other end into the
household mains socket. At this time, the unit can work normally.
Note: Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being
damaged.
USE HEADPHONES _ @
• Insert headphones into the phones jack of the unit.
• Turn off the power when inserting or removing headphones.
BEFORE CONNECTIONS
• Turn off the power of the unit and other equipment.
• Insert the plug fully.
• Hold the plug to disconnect the cord, do not pull the cord.
.9.