Panasonic Omnivision PV-M1369 Operating Instructions Manual page 12

You can set up to 8 programs to be recorded while you are away.
Display SET PROGRAM.
Press PROG,
• if a program is already m memory,
press •V, and • to select an
unused programnumber.
_;_ll'Check
list before you
begin.
[] All connectionsare made (see page 5.)
[] YourCombination VCR is pluggedin.
[] The clockis set to correct time.
[] The tape is longenough.
[] The recordtab is in place.
2
Set the recording DATE.
1) Press AT to
O select.
2) Press • or •
to set.
• 1-31 = One time
• DAILY = MON~FRI
• WEEKLY SUN-SAT
= Same time once a
week
t,._B--9 ........
/
Today's -- 7 SELECTA/V SelectionOrder DAILY
Date _._E_-Y WEEKLY WEEKLY_.J
(SAT) ..... (MON_ (SUN)
Repeat step 2 to sat:
• start time, step time
• Channel (or LINE for outside source)
• Category [N/A (not applicable),SPORTS,
MOVIE, COMEDY, MUStC, DRAMA]
• Speed (SP, LP, SLP)
SELECT/
SET
• :CH UP
V :CH DOWN
• :VOL UP
< :VOLDOWN
1 PROG
4
Make the notes.
• tfnot wanted, go to step 4.
O 1) Press • to
begin.
2) Press •V to
(_ select. 3) Press • or •
to set.
4) Press PROG
(or ACTION) to
end.
• Characters will change in the followingorder.
_-_C9 ....... Z- BLANK-
- --&
*-I
....... 2--1--0--I--!"- "_
Continued on the next page.
• If =PLEASE PREPARE FOR TIMER REC" appears end/or the
PROGRAM TIMER indicatorflashes, check that a cassette with
record tab is loaded and the CombinationVCR is in Stop mode.
• If the start times ot two pmgrems overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recordingcomes up dudnga normal
recordingor One Touch Recording(page 11), the Timer Recording
will not be performed.
• If there is a power interruptionof more than one minute,the
recordingmay not be pedormed or continue.
• If "INCOMPLETE" appears after all items have been set, check all
entriesand make necessarycorrections.
12
Timer Recording Using
- Combination VCR Buttons-
You can set the Timer Recording using
ACTION key on the Combination VCR.
(See page 7.)
'DPress STOP]EJECT and REW
together withouta tape to display
MAIN MENU.
Press AY4• to select "VCR"
and STOP/EJECT and REW
together to display SET UP VCR
screen.
Press J,Y to setsct"T|MER
PROGRAM" and • to display the
TIMER PROGRAM screen.
I_, Repeat steps 2-5,