Table of Contents
Advertisement
L
VCH Plus+p_og_,_rnm_ng
allows you to set most items of a timer recordingby simply enteringa special code lound in I V GUID[-
magazineas well as the TV listings in selectednewspapers. In order for the CombinationVCR to read this special code, some set up hs
required.A Guide (VCR Plus+)channel number is assigned to each local broadcastand cable station. Becausethis numbersometimes
differsfrom the channelyour TV receivesthe stationon, it is necessaryto program the CombinationVCR with local channel information.
CLEAR/RESET
O
VCR Plus+ Channel Set Up
(For connection
B on page 24 only)
Channel Set Up Preparations
O
Push MENU
to display the
WHEEL
MENU
menu.
NOTE: Complete the steps on this page if your
VCR hook-up resembles "B" on page 24,
Prepare a list like the example below,
This list will help you smoothly enter the information
needed in step@at right.
You will need the following to complete the list:
•
A line up of normal and/or cable stations you
receive along with the channel numbers your TV
receives them on. A cable channel line-up chart
is supplied by your cable company.
•
A list of Guide (VCR Plus+) channel numbers
assigned to the stations you receive. This list is
available in TV Guide and the TV listings found
in selected newspapers.
1
Make a chart with 3 columns like the example
below. In the left column, fill in the name or call
letters of the stations you receive.
2
In the middle column, fill in each station's
assigned Guide (VCR Plus+) number found in
TV Guide, newspapers, etc.
3
In the right column, fill in the channel number
that your TV receives the station on from your
channel line-up.
EXAMPLE ONLY
Assigned
Guide
(VCR Plus+)
channel no.
33
38
O4
11
Broadcast or Cable
Station Name
Channel
no.
your TV
receives the
station on
15
2O
O4
HBO
Nickelodeon
CBS
FOX
Rotate and push
the WHEEL
to select "CH".
MAIN
MENU
C H
CLOCK
EX I T
SELECT
ROTATE
WHEEL
SET
PUSH WHEEL
Rotate
and
push
ISET 1
the WHEEL to
ANTE.N"
SYSTEM CATV
AUTO
SET
select VCR Plus+
_
CH SET UP.
SELECT R OTATE
WHEEL
SET
PUSH
WHEEL
END
PUSH
MENU
KEY
IMPORTANT NOTE:
For this step, use the list you prepared. You may leave lines
blank if, you don't receive that station, or the GUIDE CH
number and the CATV (or TV) CH numbers are the same.
f
Push the
/
VCR
Plus+
CH
SET
UP
WHEEL tO
/
GU,OEOH
C,,TVCH
move the
-. r_
--
02
--
shaded
area on
SELECT R OTATE
WHEEL
the right side.
/ SET
Push W HEEL
L
END
PUSH
MENU
KEY
Then, Rotate the Wheel
to change CATV CH number.
Next, Push the Wheel
to enter CATV CH number.
Now, Rotate the Wheel to continue.
Repeat this operation until the list is complete.
To Make Corrections
Rotate and push the Wheel to select the incorrect CATV or TV
CH number.
Then, Push CLEAR/RESET
to delete the numbers.
Now, use the Wheel to re-enter the channel.
MENU
Push
MENU
twice
to
exit the VCR
Plus+
CH SET UP mode.
" _
• Make your entries within 5 minutes or the
(NOTES}
Combination
VCR will leave this mode.
• Once local channels have been programmed,
they will
stay in memory, even in the case of a power failure.
25
Advertisement
Table of Contents
