Checking And Choosing The Proper Location; Space Requirements; Installing On A Floor - LG WT1101CW Owner's Manual

12 INSTALLATION INSTRUCTIONS
Checking and choosing fhe proper
Iocafion
Install the washing machine on a solid floor that is strong and
rigid enough to support the weight of the washing machine,
even when fully loaded, without flexing or bouncing. If the
floor has too much flex, you may need to reinforce it to make
it more rigid. If the floor is not solid, it may cause severe
vibration and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
:3 Allow for sufficient space between the walls and the
washing machine for installation.
You must allow sufficient space for water lines, the drain
line, and airflow.
,-@ NOTE }
o Be sure to allow for wall, door, or floor moldings that
may increase the required clearances.
54.33"
(138.0 cm)
(with lid
open)
m
26.8"
°(68. 0 cm) _-
4.7" 0,8"_,.
2.0 cm_(2.0 c[
40.16"
(102.0 cm)
27" _0,8"
_(69.6 cm)_ (2.0 cm)
NOTE
Before installing the washer, make sure the floor is
clean, dry and free of dust, dirt, water and oils so the
washer feet cannot slide easily. Leveling feet that can
move or slide on the floor can contribute to excess
vibration and noise due to poor contact with the floor.