Zenith Z42PX2D Installation And Operating Manual page 46

External Control Device Setup
01. Power
(Command2:a)
• To control Power On/Off of the Monitor.
Transmission
[[k][a][ ][Set ID][ ][Data][Cr] ]
Data 0 : Power Off 1 : Power On
Acknowledqement
[[a][ ][Set ID][ ][OK][Data][x] ]
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function,
02. Input Select (Command2:b) (Main Picture Input)
• To select input source for the Monitor.
Transmission
[[k][b][ ][Set ID][ ][Data][Cr] I
Data 0: DTV 5: Component 2
1 : Analog 6: RGB-DTV
2: Video 7: RGB-PC
3: Front Video 8: HDMI/DVI
4: Component 1
Acknowledgement
[[b][ ][Set ID][ ][OK][Data]ix] I
03. Aspect Ratio (Command2:c) (Main picture format)
• To adjust the screen format,
You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.
Transmission
[[k][c][ ][Set ID][ ][Data][Cr]
Date 1:4:3
2:16:9
3: Horizon
4: Zoom 1
5: Zoom 2
J
6: Set by program
10: Cinema Zoom (1)
1 F: Cinema Zoom (16)
Acknowledqement
[[c][ ][Set ID][ ][OK][Data]ix] ]
04. Screen Mute (Command2:d)
I_ To select screen mute on/off.
Transmission
[[k][d][ ][Set ID][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledqement
[[d][ ][Set ID][ ][OK][Data]ix] ]
05. Volume Mute (Command2:e)
• To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[[k][e][ ][Set ID][ ][Data][Cr] J
Data 0 : Volume mute off (Volume on)
1 : Volume mute on (Volume off)
2 : EZ Mute
Acknowledgement
[[e][ ][Set ID][ ][OK][Data]ix] J
06. Volume Control
(Command2:f)
• To adjust volume.
You can also adjust volume with the volume buttons
on remote control,
Transmission
[[k][f][ ][Set ID][ ][Data][Cr] ]
Data Min:0~ Max:64
• Refer to 'Real data mapping' as shown below.
A cknowledqement
[[f][ ][Set ID][ ][OK][Data]ix] ]
07. Contrast (Command2:g)
• To adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission
[[k][g][ ][Set ID][ ][Data][Cr] ]
Data Min:0~ Max:64
• Refer to 'Real data mapping' as shown below.
Acknowledqement
l[g][ ][Set ID][ ][OK][Data]ix] ]
08. Brightness (Command2:h)
• To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[[k][h][ ][Set ID][ ][Data][Cr] ]
Data Min:0- Max:64
• Refer to 'Real data mapping' as shown below.
Acknowledqement
[[h][ ][Set ID][ ][OK][Data]ix] J
* Real data mapping
0 Step 0
A Step 10 (SET ID 10)
F Step 15 (SET ID 15)
10 Step 16 (SET ID 16)
!
63 Step 99 (SET ID 99)
64 Step 100
46 Plasma TV 206-4022