INSTALLATION
11
Removing/Assembling
the
Refrigerator
Door Handles
Removing/Assembling
the
Freezer
Drawer
Handle
NOTE
Removing the doors is always recommended
when it /
is necessary to move the refrigerator through a nar-
/
row opening. If it is necessary to remove the handles,
follow the directions below.
Removing
the
Handles
1
Loosen the set screws D with a s/
in. Allen wrench and
32
remove the handle.
Loosen
the mounting
fasteners
_ that connect
to the
refrigerator
door and handle
using a 1/4 in. Allen
wrench,
remove
the mounting
fasteners.
Assembling
the
Handles
Assemble the mounting fasteners El at both ends of the
handle using a 1/4in. Allen wrench.
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
screws _ with a a/a2in. Allen wrench.
Removing
the
Handles
1
Loosen the set screws _ located on the lower side of
the handle with a 1/8in. Allen wrench and remove the
handle.
Loosen
the mounting
fasteners
_ that connect
to the
freezer
drawer
and handle
using a 1/4 in. Allen wrench,
and remove
the mounting
fasteners.
Assembling
the
Handles
Assemble the mounting fasteners _ at both ends of the
handle using a 1/4in. Allen wrench.
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
screws _ with a 1/sin. Allen wrench.