Cabinet Installation - LG HBLG7000H Owner's Manual

Cabinet Installation
1. Open the window. Mark a line on
center of the window stool(or desired
air conditioner location).
Carefully place the cabinet on the
window stool and align the center
mark on the bottom front with the
center line marked in the window
stool.
2. Pull the bottom window saslh down
behind the upper guide until it meets.
Do not pull the window sash
down so tightly that the
movement of Frame Curtain is
restricted.
Upper Guide
Window stool
Front Angie
Fig, 1
Window Sash
Foam-
Frame Cumin 0
Foam-pe@
3. Loosely assemble the sill support
using the parts in Fig, 3.
4. Select the position that will place the
sill support near the outer most point
on sill (See Fig, 4)
Be careful when you install the
cabinet (frame guides @ are
broken so easily).
5. Attach the sill support to the cabinet
track hole in relation to the selected
position using 2 Type A screws in
eaclh support(See Fig. 4).
6. The cabinet should be installed with a
very slight tilt(about 1/2"') downward
toward the outside (See Fig. 5).
Adjust the bolt and the nut of sill
support for balancing the, cabinet.
7. Attach the cabinet to the window stool
by driving the screws ® (Type B:
Length sixteen millimeters and
below,) through the front angle into
window stool.
8. Pull each Frame curtain fully to each
window sash track, and repeat step 2
_rew(Type A) Q
_rew(Type B)
Sill suppodQ
SashPack
SilJ suppo_Q
Front Angle
Screw(Type B)_