Zenith P42W22 Owner's Manual page 25

Picture Phase Adjustments
• If the picture isn't clear after auto adjustment and especially if the characters are still trembling, then
adjust the picture phase manually.
• The SCREEN menu option will not be selectable if PIP is active.
Press the menu button and then use the up/down button to
select the SPECIAL menu.
Press the vol ( • ) button.
menu
@
Use the up/down button to select SCREEN
and then press the vol ( • ) button.
SPECIAL
Use the up/down button to select PHASE
and then press the vol ( • ) button.
v POSITION
H POSiTiON •
PHASE i•
RESET •
Use a vol button to adjust phase and then press the enter button.
• The adjustment range of PHASE is 0 ~ 63.
j Initializing (Reset to factory value)
• To initialize the adjusted value, select RESET with the • / • button and then
press the I_ button.
25