Zenith P42W22 Owner's Manual page 24

PC Mode Adjustments
usting horizontal/vertical position manually
- Only adjust V-POSITION and H-POSITION in DTV or component 480p/720p/1080i.
\
Press the menu button and then use the up/down button to
select the SPECIAL menu.
Press the vol ( • ) button.
menu
@
Use the up/down button to select SCREEN
and then press the vol ( • ) button.
SPECIAL
Use the up/down button to select V-POSI-
TION or H-POSITION and then press the
vol ( • ) button. AUTO CONFEG P
V POSmON
H POSmON
PHASE
RESET
24
Use the vol buttons to adjust to get the desired horizontal or
vertical position and then press the enter button to remove menus.
" The adjustment range of V-POSITION is -50 ~ +50.
• The adjustment range of H-POSITION is -100 ~ +100.
• Based on the input mode, the adjustment range of V-POSITION/H-POSITION
may change.
• Based on the VGA card, the adjustment range of V-POSITION/H-POSITION may
be out of -100 ~ +100 after auto configure.
• Based on the input signal, the position of the picture may not change even though
you have adjusted the horizontal or vertical positions.