Table of Contents
Advertisement
Programming
the Remote Control Using Access Codes
The remote control can be set to control other manufacturers
components,
by utilizing the MODE SELECTION
BUTI'ONS tot CABLE, DSS, VCR, RCVR (a Receiver
or Amplifier),
CD, LD, and AUX (for Cassette Players, Second
VCR or a DVD.)
Use the following
procedure for setting up the
remote
control
using
the
numerical
buttons
when the component's remote code is known.
D-] Determine, the brand of the component.
_._ Identify the code(s) associated with the
brand from the infrared code index (see
following
pages). Record all possible
codes.
_
Confirm that the component is plugged
in and operating
properly, then turn it
OFF.
_
Press and hold the _
button, then
the
_)
button
so that both are
pressed at the same time for at least
5 seconds.
Then let go of the buttons.
_
Press the appropriate
Mode button
for the component.
[(_ Enter the 3-digit code, by using the
Remote
Control
Keyboard
"0"
through
"9" buttons.
Now the
remote
is set for
the
entered code:
[:_ Press the: _
button to test the remote.
If
the
correct
code
is
setup
for
the
component
(in step
[_), the component
will turn ,on.
NOTE: Some brands
have multiple
codes.
Repeat the procedure
using another
listed
code
until
the
component
responds
correctly.
[]
Code From
Index Sheet
I' 1 101
TNQ2AE007-1
Use the following
procedure
for setting up the
remote control
when the component's
remote
access
code
is not known.
This procedure
uses the "sequence
method".
!
Confirm ,:hatthe component is plugged
in and operating properly, then turn it
OFF.
I-_ Press and hold the 1_
button,
then the _
button so that both
are pressed at the same time for at
least 5 se_6_dsi
Then let go of the
buttons.
L__JPress th,e appropriate Mode button
for the device.
l_lPress
the
_3
button to step
over to the next code.
L___J Press the
button to test the
remote.
I'I the correct
code is
sent, the component
will turn on.
J-_ Once the correct code is found,
press the
I_
button
to store the code.
_--j Repeat from step 3 above until the
proper cornponent code is found. It
may take several attempts
before
the correct code is found.
NOTE: If an incorrect code is entered, or when
the operation is not completed within 30
seconds, the settings will not change.
Helpful Hint:
Write down the code numbers for your components in the space provided
below. This
will serve as a handy reference whenever you need to reprogram your remote control.
CABLE
Cable TV Converter Box
DSS
Digital Satellite System
Other
Componeel
Other
C 3mponent
T
T
1
I
!
L
VCR
i
co
Video Cassette Recorder
_
1__
Compact Di._c Player
RCVR
[
LD
Receiver or Amplifier
[
!
1_ _
Laser Disc Player
,
!
i'
Other
Component
Other
Component
[
i
Other C, o m ponent
Other Component
I
_m
I
l
I
- 31 -
Advertisement
Table of Contents
