Panasonic Lumix DMC-FH24 Owner's Manual page 75

Recording
• Auto White Balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, Auto White Balance may not function
properly. In this case, set the White Balance to a mode other than [AWB].
1 Auto White Balance will work within this range _oooo
2 Blue sky 9000
_ <
_)3)¢
3 Cloudy sky (Rain) 8ooo_ ft_._._
4 Shade
.....
_ 4)_]'[_.
5 Sunlight 1) 6ooo_ ).<,_,
5000
6 White fluorescent light --_)_
7 Incandescent light bulb 4ooo_
8 Sunrise and
sunset 3°°°_7 ) _-_
9 Candlelight _ooo_ _ 8) ___
K Kelvin Color Temperature _ooo_ _ )
Set the White Balance value. Use to match the condition when taking photographs.
1 Select
[_SET]
and then press [MENU/SET].
2 Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and then
press [MENU/SET].
• White Balance may not be set when the subject is too bright or too
dark. Set the White Balance again after adjusting to appropriate
brightness.
• Exit the menu after it is set.
-75-