Panasonic Omnivsion PV-S4670 Operating Instructions Manual page 13

Rotate and push the WHEEL
to set the Cable box or DSS
receiver code number that
matches your brand from
the list on page 11.
• This determines whether the
VCR will control your cable box
or DSS receiver.
- CABLE/DSS BOX SET UP --}
c.oosE ACOOE NUMBER _OBl
CABLE BOX,OSS RECE.VER i
_,,OM THE L.ST .N O ,,,NER'SI
MANUAL AM0&NTER ,UMBER. i
SELECT : ROTATE WHEEL /
SET : PUSH WHEEL |
END : PUSH MENU KEY J
I_L If you use a cable box, tune it to
! channel 02.
If you use a DSS receiver, tune
it to any channel other than 200.
Push WHEEL to continue.
If Cable Box
- CABLE/DSSBOXSETUP-- I
PLEASE TUNE YOUR CABLE I
BOX TO CH02, I
I
If DSS Receiver
[FPR_EED I ;_jSH _;EEjLKE Y
®
®
_ i¸
Rotate and push the WHEEL
to select YES or NO.
If you use a cable box and
selected YES, go to step 11.
If you use a DSS receiver and
selected YES, go to the Alternate
Instructions on page 14.
If NO, the screen in step 8 will
reappear. Try entering a
different code assigned to your
brand and/or repositioning the
equipment (see page 11 ).
If the answer is still NO, cable
box or DSS receiver control is
not available. Push MENU and
go to the Alternate Instructions
on page 14.
If Cable Box
- CABLE/DSS BOX SET UP -1
IS YOUR CABLE BOX
I
RECEIVlNGI. _ 09 ? I
NO I
If DSS Receiver
I REOE,V, oe:
ISELECT : OOTATE WHEEL
ISET : PUSH WHEEL
[END : PUSH MENU KEY
Rotate and push the WHEEL
to select and set the local
PBS channel number you
receive on your cable box.
• If you live near a different time
zone, enter the channel in your
time zone.
SET CLOCK !
PLEASE ENTER YOUR LOCAL /
PBS CHANNI_CABLE
BOX /
SELECT ROTATE WHEEL /
SET PUSH WHEEL |
END PUSH MENU KEY
VCR
Confirm that your cable box is
on and that your DSS Box is off.
Push WHEEL to start
CHANNEL AUTO SET and
AUTO CLOCK SET.
"CH AUTO SET PROCEED\NG"
"CH AUTO SET COMPLETED"
"AUTO CLOCK SET PROCEEDING"
This display appears when
auto clock set is completed.
C.,onfirm that the time is
.C,9.EeG andpush CHA
to exit.
SETrlNG : CH02 /
AUTOCLOCK SET I
I
O0#PZ_;D(
[ND : PUSH OH UP KEY /
If the Auto Clock Set
displayed time is incorrect
If you use a cable box and
receive more than one PBS
station, try auto clock set again.
Follow the Set or Reset Auto
Clock Set steps and when the
instructions call for you to enter
a PBS station, make sure to
enter the one you have not
tried yet.
If AUTO CLOCK SET
INCOMPLETE appears
The screen below will appear
on-screen if auto clock set
data is not available in your
area.
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Push MENU to display
the manual clock set
screen. (See the
"Manual Clock Set"
section on page 14.)
Note:
If you use a cable box and
receive more than one PBS
station, you may exit the
manual clock set screen and
try auto clock set again.
Follow the Set or Reset Auto
Clock Set steps and when the
instructions call for you to
enter a PBS station, make
sure to enter the one you
have not tried yet.
• Auto clock set will be performed
when the VCR is turned off for
t_e _i_st t_me eeLch da_t. \_ _ou
Llse a c_._o\e boy. al"_ _tou _N_,n_
auto clock set to be performed,
the cable box must be left on at
the time the VCR power is
turned off.
13