Advertisement
VCR can't be remote controlled...
You can't view programs normally on TV...
Video cassette can't be inserted...
Video cassette can't be removed...
Video cassette ejects when the REC and PLAY buttons are
pressed or when the POWER button is pressed off to set
the Timer...
In the stop mode, the motor (CYLINDER) continues to
rotate...
• Aim the Remote Control directly at the remote sensor on
the VCR. (Refer to Control Reference Guide.)
• Avoid all obstacles which may interfere with the signal
path.
• Inspect or replace the batteries (P.2).
• Set the VCR/I-V selector to "1V". (P.8)
• Insert the cassette with the window side up a_ld the record
tab facing you.
• Check that the power plug is completely connected to an
AC outlet.
• Make sure the record tab on the back of the cassette is
still intact. (P.20)
• To enable the quick play mechanism, the cylinder will
rotate for about 10 minutes.
• The quick play mechanism reduces response time from
stop to PLAY mode from PLAY to REWIND search mode.
25
Advertisement
