Advertisement
Connections
you'll
need to make.
(Choose front or rear
connection.)
Front View
for front audio/video
input connection
=
IF]
I_IAII
(_/ideo In_
(_Audio In_
Playing (Source) VCR
Recording
(Editing) VCR
TV for Monitoring
II
Q
CH3 or 4
[] ,
_,;_
Insert a pre-recorded
tape
into the Playing (Source) VCR.
2
Then, insert a blank tape
with record tab into the Recording
(Editing) VCR.
Select "LINE"
as the input on the Recording VCR.
LINE1: For rear audio/video connection.
LINE2: For frontaudio/videoconnection.
• See page 8 for LINE inputinformation.
Press PLAY
on the Playing VCR.
Then, press PAUSE/STILL
when the tape reaches the point you want to
start copying.
Press REC and PLAY
at the same time on the Recording VCR.
Then, press PAUSE/STILL
immediately.
Press PAUSE/STILL
on both VCRs to 10egincooying.
Then, press STOP
on both VCRs to stOP cooying.
To Monitor
the Re-Recording
Turn the TV on and select its
VCR channel
(either channel 3 or 4).
Then, set the VCR/TV selector
on the Recording VCR to the "VCR" position.
I Caution:
1
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
Helpful
Note
• By using the PAUSE/STILL
button (on the
Recording unit) while copying is in progress, you can
edit out unwanted parts of the original recording.
9
Advertisement
