Table of Contents
Advertisement
ST-CH505
E-CH717
- SE-CH515D
_L-CH515
For SC-CH717 only
Connect the flat cable.
Connecting
Disconnecting
1. Connect
the shorter flat cable to the terminal of the
tuner/sound processor and amplifier.
2. Connect
the longer
flat cable to the terminal
of the
tuner/sound
processor, compact
disc changer,
and cas-
sette deck.
Route the cable horizontally
(underneath
the heat outlet
grille) so that the side with the white-colored
lead is posi-
tioned facing to you.
Be sure
to connect
the blue-colored
connector
to B1
(tuner/sound
processor).
After connection,
fold and press the cable as flat to the back
of the unit as possible.
Heat outlet grille
Do not try connecting
or disconnecting
the flat
cable while the power is switched to ON.
Connect the FM indoor antenna.
Install the antenna on a wall at a height, and in a direction,
which results in the best reception.
Adhesive tape
FM indoor antenna
(included)
The tip of the internal antenna
wire should
not come into
contact with any metal objects.
When you cannot get a good reception with this FM indoor
antenna, we recommend
you install an FM outdoor antenna.
(Not included. See page 10.)
8
Hide quick links:
Advertisement
Table of Contents
