Remote Control Quick Reference Guide - Panasonic PT-43LC14 Operating Instructions Manual

RemoteControm QuickReferenceGuide (Operating peripheral equipment)
Programming Without A Code
This procedure searches all codes and is called the "sequence method."
Setting to the remote using the step and set method
(When code Bsnot known):
POWER
+
@
Confirm that the external component is plugged
in and on. Turn the component off.
Press OK and POWER together, for at least 5
seconds.
Press appropriate component button on the
Remote Control.
Press VOL _ to move forward to the next code.
Press VOL 4 to move backward.
Press the Remote Control POWER to test the
component, if the procedure was successful, the
component will turn on.
Note:
* Repeat the above steps until the component code is
found. It may take many attempts before the correct
code is found.
After the code is found, press OK to store the
code.
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some
components may not operate because the codes are not available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need to program your
Remote Control.
CABLE _ VCR
Cable Box Video Cassette Recorder
DBS r---r---r-'m RCVR
Digital Broadcast System _ Receiver or Amplifier
Other Component Other Component
Compact Disc Player
DVD
_ Digita! Versatile Player
[- q
Other Component
[- q
[- q
76