Selecting A Scene Mode To Take Pictures (Features) - Nikon COOLPIX S4100 User Manual

Selecting a Scene Mode to Take Pictures (Features)
See"%ooting in the %ene Mode Selectedby the C_amera ( SceneAuto Selector)"
(_ 61)for more information on sceneauto selector scenemode.
-_- Portrait
Use this mode for portraits.
• When the camera detects a human face, that face will be
framed by a yd]ow double border (focus area). See "Face
Detection" (_ 41) for more information.
• if more than one face is detected, the face nearest to the
camera will be framed by a double border (focus area) and
the other faces will be framed by a single border. Tap the
face framed by a single border to change the focus area to
that face ([_) 45, 50).
• The camera softens skin tones (in up to three faces) by applying the skin softening
function before recording pictures ([_) 75).
• If no faces are detected when the shutter-release button is pressed halfway, the camera
focuses on the subject at the center of the frame.
• Digital zoom is not available.
• The default setting for flash mode is 2@ Auto with red-eye reduction.
• Use the scene effect adjustment slider (_ 60) to adjust picture brightness.
i Landscape
Use this mode for vivid landscapes and cityscapes.
• Camera focuses at infinity. The focus area or focus indicator
([_) 30) always glows green when the shutter-rdease
button is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
• Flash isdisabled.
• AF-assist illuminator (_ 156) does not light up.
• Use the scene effect adjustment slider (_ 60) to adjust picture saturation.
o_
o
oo
63